HOME ABOUT US NEWS CASE PRODUCTS CONTACT
Welcome to Zhangjiagang Kaida Machinery Manufacturing Co.ltd.! Today is:   2018-01-20  
EN CN
 Product List
KS Series Water Type Mold Te..
KY Series Of Oil-Type Mold T..
KFJ Series Air Cooled Indust..
KSJ Series water cooled indu..
Water-Cooled Screw Chiller
Air-Cooled Screw Chiller
Low Temperature Chiller
KFJ-DW Series Low Temperatur..
KSJ-DW Series Low Temperatur..
KFJ / KS Series Heating & Co..
Laser chiller
DRS Series Three In One Dehu..
DR Series Dehumidifying Drye..
PET Extrusion System
PET Injection System
Desiccant drying system
 Contact Us
TEL 86-512-58532820\58536338
FAX 86-512-58532819
MOB 13962256686
MAIL 13962256686@163.com / Kdajx@plas-kdajx.com
   
  Home > KaiDa > Products > KY Series Of Oil-Type Mold Temperature Control
KY Series Of Oil-Type Mold Temperature Control
  Product details
Profile:
Oil temperature control machine merit is controls the warm scope big , thermo stability good, but needs the medium cost,has the greasy dirt,the heat conduction efficiency was inferior to the water temperature machine,this company newest development type,controls the warm scope to reach 320,It has the structure compact,rises to decrease temperature the speed to be quick, control the warm precise characteristic.
Features:
Electric control panel and machine are separated.Its can obtain good insulation effect,so that be able to extend the useful duration of the electric parts.
Import microcomputer pair of group P.I.D temperature controls the scheduling,touches the type storage,the automatic calculation,saves above electricity 35%
The safe keeping of security and the failure indication system is perfect.
The import high-quality module,the service life is long.
Heating and cooling speed quickly, the temperature precise is stable.
The unique double power heats up the design ,suitable for different temperature control places, the energy conservation effect is obvious .
Main pipeline stainless steel is molded in one body with less pipe damage and equal heating.
Automatically,opening machine and exhaust function.
Working Principe:
The high temperature oil returns to the machine and then be pressured by pump to the heaters. After being heated,oil will be forced to the mould and continue the circle.In the process,if the oil temperature is too high,system will activate the solenoid valve to let cooling water cool down high temperature oil indirectly until the temperature is down to the system requirement. If the temperature keeps increasing and reaches to the set point of EGO,the system will sound alarm and stop operation.The system will have low level alarm and stop working if oil level falls down below the set point.
Specification Sheet:

Note:

1) 6X2 stands for the double section zones, each section can be controlled. We
 also can accord to the customer require to design.
2) In order to the cooling temperature ,the cooling water temperature should be no more than 25, cooling water pressure should be no less than 2kgf / cm2, but also no more than 5kgf / cm2.
3) Pump testing standard:Power of 50HZ, Heat conduction oil at 30.(There is ?10% tolerance for the max.flow rate and the max. pressure.)
4) The machine power supply: 380AC, 50Hz, 3. We can Customize the export voltage frequency and bigger heat power machines.
5) If you need that the heating temperature is 250 or 320, please declare before ordering.

 

Reading times1411Time
Close the window
Copyright 2015 @ KAIDA Machinery homeMessageMailAlbum